Flange electric ball valve

Quick Electric Ball Valve Manual

Automatic reset: normally open and normally closed switch speed: 1 second 3 seconds

Working voltage: AC DC  6V  12V  24V  36V  220V

Working medium: water (high-temperature steam is not available), liquid, gas, light oil, etc

Medium temperature: -5-120 ℃ Operating pressure: -0.1-1.0Mpa

Valve body material: 304 G thread

Connection method: 1. Thread G thread 2. Quick installation 3. Flange

Diameter: DN15-DN50

Features: Zero leakage, full diameter, high vacuum flow rate, regardless of inlet and outlet and flow direction. Durable, with automatic power-off protection when the switch is in place, allowing for small particles in the medium, energy-saving, and smooth operation

Wiring: 1. Two wires without distinguishing between live and neutral wires, can be connected to an adapter power supply. 2. Three wires with two controls

Shelf life of one year, waterproof IP67 installation position 360 degrees without dead corners, can be installed horizontally, vertically or inverted

Matters needing attention

1. Fast electric ball valve, new ones require a charging time of ≥ 15 seconds, and those that have not been opened for a long time also require a charging time of 15 seconds!

2. Confirm whether the power supply voltage matches before installation.

3. After connecting the leads, it should be confirmed that the connection will not loosen due to shaking, causing the electric valve to malfunction.

4. The pipeline should be firm, as pipeline vibration can affect the service life of the electric valve.

5. Do not disassemble or modify the circuit without the permission of our factory, otherwise normal after-sales service cannot be carried out.

6. This product is not explosion-proof and cannot be used in environments with explosive gases and flammable and explosive materials.

7. For places where product failure may cause significant personal injury or property damage to you, please use them with caution and prepare corresponding contingency plans and spare parts.